2008BMW HP2 Enduro

Rate this bike

36 fields on record

The 2008 BMW HP2 Enduro is a high-performance adventure bike designed for experienced riders seeking serious off-road capability combined with on-road versatility. Its 1170cc boxer engine delivers 103 horsepower and 115 Nm of torque, making it one of the most powerful bikes in its class. Best known for aggressive styling and exceptional handling both on and off pavement, it suits adventurous riders tackling challenging terrain.

Capacity: 1170.0 ccm
Engine: Boxer
Gearbox: 6-speed
Dry weight: 175.0 kg
Seat height: 920 mm
Power: 103.3 HP (76.0 kW) @ 7000 RPM

⇄ Compare with another bike ＋ Add to garage All model years

What’s new for the 2008 BMW HP2 Enduro

vs the 2007

Spec	2007	2008
Engine capacity	1130.0 ccm (68.96 cubic inches)	1170.0 ccm (71.40 cubic inches)
Power	105.0 HP (77.2 kW) @ 7000 RPM	103.3 HP (76.0 kW) @ 7000 RPM
Front suspension	45 mm UPSD fork	WAD upside-down front fork, 45 mm, compression damping continuously adjustable in two ranges, rebound damping adjustable
Rear suspension	EVO Paralever	Forged aluminium single-sided swinging arm with BMW Motorrad Paralever

Other years 2006 2007 2008

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail92%

Cornering68%

City riding45%

Daily riding40%

Touring60%

Two-up25%

Track35%

Best for: Built as a hardcore, high-performance enduro for serious off-road exploration and long-distance dual-sport adventure riding rather than pure pavement speed.
Built for: It has a rugged, torquey boxer character with a purposeful, rally-inspired presence that rewards deliberate, skilled riding over rough and varied terrain.
Not ideal for: This is not the right bike for short riders, novices, or anyone wanting a plush commuter or a light nimble city runabout.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 920mm, a rider of 68.9" with a 31" (estimated) inseam will not reach the ground comfortably on the 2008 BMW HP2 Enduro, with a cramped knee angle of around 80 degrees and a slightly forward riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at over 900 mm — Sky High →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 1170.0 ccm
Power: 103.3 HP (76.0 kW) @ 7000 RPM
Torque: 115.0 Nm (11.7 kgf-m)
Engine type: Boxer
Power/weight ratio: 0.5903 HP/kg (dry)
Bore x stroke: 101.0 x 73.0 mm
Compression: 11.0:1
Cooling system: Oil & air
Fuel system: Injection
Valves per cylinder: 4

Transmission

Gearbox: 6-speed
Transmission type: Manual
Final drive: Shaft
Clutch: Single dry plate clutch, hydraulically operated

Dimensions & weight

Wheelbase: 1625 mm
Overall length: 2350 mm
Overall width: 880 mm
Overall height: 1266 mm
Seat height: 920 mm
Dry weight: 175.0 kg
Wet weight: 195.0 kg
Fuel capacity: 13.00 litres
Ground clearance: Not on record - add it

Chassis & suspension

Frame: Tubular steel space frame
Front suspension: WAD upside-down front fork, 45 mm, compression damping continuously adjustable in two ranges, rebound damping adjustable
Rear suspension: Forged aluminium single-sided swinging arm with BMW Motorrad Paralever
Front wheel travel: 270 mm
Rear wheel travel: 250 mm
Rake (fork angle): 32.5°
Trail: 157 mm