Adventure Motorcycles

2007Benelli TRE 1130 K

41 fields on record

The 2007 Benelli Tre 1130 K is an adventure-touring enduro designed for riders seeking a unique three-cylinder experience with genuine off-road capability. Its 1130cc inline triple engine delivers 123 horsepower and 115 Nm of torque, providing spirited performance both on pavement and light trails. Known for its distinctive character and Italian engineering, it appeals to adventurous riders valuing individuality over conventional dual-sport offerings.

Capacity: 1130.0 ccm
Engine: In-line three-cylinder, four-stroke
Gearbox: 6-speed
Dry weight: 205.0 kg
Seat height: 838 mm
Power: 123.4 HP (90.8 kW) @ 9000 RPM

⇄ Compare with another bike ＋ Add to garage All model years

Other years 2007 2008 2009 2010 2016 2017

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail20%

Cornering70%

City riding55%

Daily riding65%

Touring82%

Two-up70%

Track45%

Best for: Built for long road journeys with the ability to handle gravel and light trails along the way.
Built for: An adventure bike from Benelli with a 1130cc engine; its character is strong and confident, with 123 hp on tap.
Not ideal for: Not for riders who want a low, light city bike or serious competition off-road riding.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 838mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with balls of both feet on the 2007 Benelli TRE 1130 K, with a moderate knee angle of around 90 degrees and a slightly forward riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 821-900 mm — Long Legs →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 1130.0 ccm
Power: 123.4 HP (90.8 kW) @ 9000 RPM
EPA CO Emissions: 10.3 CO g/km
Torque: 115.0 Nm (11.7 kgf-m)
Engine type: In-line three-cylinder, four-stroke
Power/weight ratio: 0.6020 HP/kg (dry)
Bore x stroke: 88.0 x 62.0 mm
Compression: 11.6:1
Cooling system: Liquid
Fuel system: Injection
Starting: Electric
Ignition: Single coil inductive discharge electronic ignition
Aspiration: Naturally aspirated
Valves per cylinder: 4
Lubrication system: Wet sump

Transmission

Gearbox: 6-speed
Transmission type: Manual
Final drive: Chain
Clutch: Wet clutch

Dimensions & weight

Wheelbase: 1514 mm
Overall length: 2183 mm
Overall width: 850 mm
Overall height: 1320 mm
Seat height: 838 mm
Dry weight: 205.0 kg
Wet weight: 240.0 kg
Fuel capacity: 22.00 litres

Chassis & suspension

Frame: Mixed solution. Front: ASD steel tube trellis,
Front suspension: Upside down fork
Rear suspension: ASD steel tube trellis swingarm with
Front wheel travel: 150 mm
Rear wheel travel: 144 mm
Rake (fork angle): 25.0°
Trail: 102 mm

Brakes & wheels

Front brakes: Double disc
Front brakes diameter: 320 mm
Rear brakes: Single disc. Bremo
Rear brakes diameter: 240 mm
Front tyre: 120/70-17
Rear tyre: 120/70-17

Specs last verified against published sources: October 2026.

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.

What changed, year to year

Differences highlighted

Specification	2007	2008	2010	2016	2017
Capacity	1130 cc	1131 cc	1131 cc	1131 cc	1131 cc
Dry weight	205 kg	210 kg	215 kg	215 kg	215 kg
Seat height	838 mm	838 mm	840 mm	850 mm	850 mm
Fuel capacity	22 L	22 L	22 L	22 L	21.5 L