What category is the 2010 Honda CB1300S ABS?

General information
Category	Allround
Model	Honda CB1300S ABS
Year	2010

Engine and Transmission Specifications
Transmission typefinal drive	Chain
Gearbox	5-speed
Cooling system	Liquid
Starter	Electric
Ignition	Computer-controlled digital transistorised with electronic advance
Fuel control	DOHC
Fuel system	Injection. PGM-FI electronic fuel injection
Bore x stroke	78.0 x 67.2 mm (3.1 x 2.6 inches)
Compression	9.6:1
Torque	117.00
Power	114.00
Stroke	4
Engine type	In-line four
Capacity:	1284.00 ccm (78.35 cubic inches)
Physical measures and capacities
Wheelbase	1,515 mm (59.6 inches)
Ground clearance	135 mm (5.3 inches)
Overall length	2,220 mm (87.4 inches)
Seat height	790 mm (31.1 inches) If adjustable, lowest setting.
Dry weight	236.0 kg (520.3 pounds)

Honda CB1300S ABS dimensions and frame
Rear brakes diameter	256 mm (10.1 inches)
Rear brakes	Double disc
Front brakes diameter	310 mm (12.2 inches)
Front brakes	Double disc
Rear suspension	Dual conventional dampers with 5-step adjustable spring pre-load and rebound damping, 116 mm axle travel
Front suspension	43mm cartridge-type telescopic fork with adjustable compression and rebound damping, 109 mm axle travel
Speed and acceleration
Power/weight ratio	0.4831 HP/kg
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Fuel capacity	21.00 litres (5.55 gallons)

Performance Profile & Rider Fit

99.2 hp

Peak Power

3.5s

0-60 mph

Best For

Track35%

City55%

Cornering65%

Daily Riding75%

Touring80%

Passenger80%

Rider Profile

Best For	Best suited to experienced riders who appreciate a big, torquey in-line four but don't need track-focused aggression.
Purpose	A sport-touring naked built for confident, long-legged road riding rather than outright sport performance or commuting nimbleness.
Rider Fit	Its 236kg dry weight and 780mm seat height demand a taller, stronger rider who can manage its heft at low speeds and standstill.
Character	A classic big-bore Honda four, delivering smooth, effortless power and stately, reassuring stability over outright excitement.
Not Ideal For	Not for new riders, off-road enthusiasts, or anyone wanting a light, flickable machine for tight city streets.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 790mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2010 Honda CB1300S ABS, with a relaxed knee angle of around 125 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →