What category is the 2000 Honda CR 250 R?

General information
Category	Cross / motocross
Model	Honda CR 250 R
Year	2000
Engine and Transmission Specifications
Clutch	Wet Multiple Plate
Transmission typefinal drive	Chain
Gearbox	5-speed
Cooling system	Liquid
Starter	Kick
Ignition	CDI
Valves per cylinder	2
Fuel system	Carburettor. Keihin 38mm Flatside PWK Carburator
Bore x stroke	66.4 x 72.0 mm (2.6 x 2.8 inches)
Compression	8.5:1
Max RPM	8500
Torque	51.00
Power	59.00
Stroke	2
Engine type	Single cylinder
Capacity:	250.00 ccm (15.26 cubic inches)

Physical measures and capacities
Wheelbase	1,482 mm (58.3 inches)
Ground clearance	345 mm (13.6 inches)
Overall width	823 mm (32.4 inches)
Overall length	2,173 mm (85.6 inches)
Overall height	1,263 mm (49.7 inches)
Seat height	952 mm (37.5 inches) If adjustable, lowest setting.
Dry weight	96.4 kg (212.5 pounds)
Honda CR 250 R dimensions and frame
Exhaust system	single 2 stroke chamber with Aluminum sliencer
Rear brakes diameter	240 mm (9.4 inches)
Rear brakes	Single disc. single piston
Front brakes diameter	240 mm (9.4 inches)
Front brakes	Single disc. 2 piston calliper
Rear tyre dimensions	110/90-19
Front tyre dimensions	80/100-12
Rear suspension travel	320 mm (12.6 inches)
Rear suspension	Pro LInk showa single shock
Front suspension travel	315 mm (12.4 inches)
Front suspension	Kayaba inverted forks
Trail	107 mm (4.2 inches)
Rake (fork angle)	26.5°
Frame type	Crome MOlly

Speed and acceleration
Power/weight ratio	0.6120 HP/kg
Top speed	140.0 km/h (87.0 mph)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Modifications compared to previous model	Lighter, Faster Engine
Color options	Red/White/Purple, Black/Red/White
Fuel capacity	10.00 litres (2.64 gallons)

Performance Profile & Rider Fit

Best For

Track90%

City5%

Cornering85%

Daily Riding5%

Touring5%

Passenger0%

Rider Profile

Best For	This bike demands an experienced off-road or motocross rider comfortable with a peaky two-stroke powerband and no electronic aids.
Purpose	Built purely for motocross racing on prepared tracks, not for street use or general recreation.
Rider Fit	Requires strong physical fitness and technique, as its tall seat height, aggressive suspension, and lack of electric start demand active, athletic riding.
Character	A raw, lightweight two-stroke racer that rewards aggressive throttle control with explosive acceleration and razor-sharp handling.
Not Ideal For	Not suitable for commuting, touring, passengers, or riders seeking comfort and low-maintenance simplicity.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 952mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with cannot reach comfortably on the 2000 Honda CR 250 R, with a cramped knee angle of around 85 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →