Honda CRF250F - 2026 Specifications and Reviews

The Honda CRF250F is an entry-level motocross bike designed for beginner and intermediate riders seeking an affordable, reliable platform. Known for its lightweight frame, manageable 250cc single-cylinder engine, and forgiving handling characteristics, it excels in off-road terrain and serves as an ideal stepping stone for riders transitioning from smaller displacement bikes.

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

Color OptionsRed
PriceUS$ 4999. MSRP depends on country, taxes, accessories, etc.
CategoryCross / motocross

Engine and Transmission Specifications

StartingElectric
Emission DetailsMeets California Air Resources Board (CARB) and EPA off-road emissions standards.
Final DriveChain (final drive)
Gearbox5-speed
Cooling SystemAir
IgnitionFull Transistorized
Fuel ControlSingle Overhead Cams (SOHC)
InductionInjection. 34mm throttle bore
Valves Per Cylinder4
Bore x Stroke71.0 x 63.0 mm (2.8 x 2.5 inches)
Compression Ratio9.6:1
Engine TypeSingle cylinder, four-stroke
Capacity:250.0 ccm (15.26 cubic inches)
 
 

Physical measures and capacities

Fuel Capacity6.06 litres (1.60 US gallons)
Wheelbase1420 mm (55.9 inches)
Ground Clearance287 mm (11.3 inches)
Seat Height884 mm (34.8 inches) If adjustable, lowest setting.
Wet Weight120.2 kg (265.0 pounds)

Honda CRF250F dimensions and frame

Rear BrakesSingle disc
Brake Disc Diameter220 mm (8.7 inches)
Front BrakesSingle disc
Rear Tyre100/100-18
Front Tyre80/100-21
Rear Wheel Travel231 mm (9.1 inches)
Rear SuspensionPro-Link® Showa single shock
Front Wheel Travel216 mm (8.5 inches)
Front Suspension41mm leading-axle Showa fork
Trail102 mm (4.0 inches)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Update specsReport missing specs or required updates.
CommentsModel ID:CRF250F.
WarrantySix months transferable, limited warranty
Rake (fork angle)26.1°
Driveline#520 O-ring-sealed chain; 13T/50T
Year of manufacture2025
Motorcycle nameHonda CRF250F

Rider Fit Visualizer

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 884mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with cannot reach comfortably on the 2026 Honda CRF250F, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.