What category is the 2012 Honda VTR 250?

General information
Category	Naked bike
Model	Honda VTR 250
Year	2012

Engine and Transmission Specifications
Clutch	Wet multi-plate coil spring
Transmission type,final drive	Chain
Gearbox	5-speed
Ignition	Full transistor type
Fuel control	DOHC
Fuel system	Injection. PGM-FI
Bore x stroke	60.0 x 44.1 mm (2.4 x 1.7 inches)
Compression	11.0:1
Torque	22.00 Nm (2.2 kgf-m or 16.2 ft.lbs) @ 8500
Power	29.50
Engine type	V2, four-stroke
Capacity:	249.00 ccm (15.19 cubic inches)
Brakes, suspension, Frame and wheels
Rear brakes	Single disc. Hydraulic
Front brakes	Single disc. Hydraulic
Rear tyre dimensions	140/70-17
Front tyre dimensions	110/70-17
Rear suspension	Swing arm
Front suspension	Telescopic fork
Trail	90 mm (3.5 inches)
Frame type	Diamond
Physical measures and capacities
Fuel capacity	12.00 litres (3.17 gallons)
Wheelbase	1,405 mm (55.3 inches)
Ground clearance	155 mm (6.1 inches)
Overall length	2,080 mm (81.9 inches)
Overall height	1,055 mm (41.5 inches)
Seat height	725 mm (28.5 inches) If adjustable, lowest setting.
Power/weight ratio	0.1832 HP/kg
Dry weight	161.0 kg (354.9 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Starter	Electric

Performance Profile & Rider Fit

29.5 hp

Peak Power

7.5s

0-60 mph

Best For

Track35%

City80%

Cornering70%

Daily Riding78%

Touring35%

Passenger40%

Rider Profile

Best For	This bike suits new-to-intermediate riders thanks to its modest power delivery and forgiving, light chassis.
Purpose	It's best suited for commuting, learning, and casual weekend rides rather than outright performance.
Rider Fit	The low seat height and lightweight build make it accessible and manageable for shorter or less experienced riders.
Character	The V-twin engine gives it a characterful, torquey feel at low revs despite its small displacement, paired with agile, flickable handling typical of naked bikes.
Not Ideal For	It's not a good fit for riders seeking high-speed touring capability, passenger comfort, or off-road performance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 725mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2012 Honda VTR 250, with a moderate knee angle of around 110 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →