Rieju MRT 125 AC - 2020 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryEnduro / offroad
ModelRieju MRT 125 AC
Year2020

Engine and Transmission Specifications

Exhaust systemRacing muffle
Transmission typeChain   (final drive)
Gearbox6-speed
Cooling systemAir
Fuel systemCarburettor. DENI P2-26
Valves per Cylinder4
Bore x Stroke56.5 x 49.5 mm (2.2 x 1.9 inches)
Engine typeSingle cylinder, four-stroke
Capacity:125.0 ccm (7.63 cubic inches)

Brakes, suspension, Frame and wheels

WheelsAlloy Rims
Rear brakesSingle disc
Diameter260 mm (10.2 inches)
Front brakesSingle disc. Double piston caliper.
Rear tire130/70-17
Front tire100/80-17
Rear SuspensionMono-shock shock absorber
Front SuspensionFork of Ø36mm.
Frame typeHighly resistant double cradle steel perimeter. Detachable rear sub-chassis.
 
 

Physical measures and capacities

Fuel capacity6.30 litres (1.66 US gallons)
Wheelbase1380 mm (54.3 inches)
Overall width800 mm (31.5 inches)
Overall length2070 mm (81.5 inches)
Overall height1145 mm (45.1 inches)
Seat height870 mm (34.3 inches) If adjustable, lowest setting.
Dry weight95.0 kg (209.4 pounds)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
CommentsSpanish brand
Electrical12 Volt
InstrumentsDigital
StarterElectric
Color optionsBlack, White

Performance Profile & Rider Fit

Best For

Track20%
City60%
Cornering55%
Daily Riding45%
Touring20%
Passenger15%

Rider Profile

Best ForThis is a friendly, low-intimidation machine well suited to newer riders or those upgrading from smaller learner bikes, note the specs given match a supermoto-styled small-capacity machine rather than a full enduro.
PurposeBuilt primarily as a lightweight, nimble supermoto/street-oriented small bike for zipping through urban streets and tight corners rather than serious off-road work.
Rider FitIts low dry weight and accessible seat height make it manageable for shorter or lighter riders, though the 870mm seat height still requires reasonable inseam length.
CharacterA playful, flickable little machine with road-biased 17-inch wheels, giving it sharp handling and eager turn-in at low speeds rather than raw power or stability at high speed.
Not Ideal ForNot suited to riders wanting highway touring comfort, sustained high speed cruising, or genuine dirt and rough terrain capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 870mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with tip-toe one foot on the 2020 Rieju MRT 125 AC, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.