What category is the 2020 Road Hopper Type 2I?

General information
Category	Custom / cruiser
Model	Road Hopper Type 2i
Year	2020

Engine and Transmission Specifications
Driveline	Constant mesh
Clutch	Wet multi-plate coil spring
Transmission type,final drive	Chain
Gearbox	5-speed
Cooling system	Air
Lubrication system	Dry sump
Ignition	Microtech ECU
Fuel control	Overhead Valves (OHV)
Fuel system	Injection. EFI
Engine details	HD Evo Sport engine
Engine type	V2, four-stroke
Capacity:	1202.00 ccm (73.35 cubic inches)

Brakes, suspension, Frame and wheels
Seat	Single seat
Rear brakes	Single disc. Hydraulic
Front brakes	Single disc. Hydraulic
Rear tyre	4.50-18
Front tyre	4.50-18
Rear Suspension	Rigid
Front Suspension	Springer fork
Rake (fork angle)	33.0°
Physical measures and capacities
Fuel capacity	7.00 litres (1.85 gallons)
Wheelbase	1,600 mm (63.0 inches)
Ground clearance	100 mm (3.9 inches)
Overall width	760 mm (29.9 inches)
Overall length	2,280 mm (89.8 inches)
Overall height	1,150 mm (45.3 inches)
Seat height	680 mm (26.8 inches) If adjustable, lowest setting.
Dry weight	220.0 kg (485.0 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Comments	Japanese custom bike.
Starter	Electric
Color options	Black, green

Performance Profile & Rider Fit

6.5s

0-60 mph (est.)

Best For

Track5%

City45%

Cornering25%

Daily Riding35%

Touring20%

Passenger5%

Rider Profile

Best For	This bike suits an experienced rider comfortable with a rigid rear end, minimal suspension travel, and the low-speed handling quirks of a hardtail custom cruiser.
Purpose	Built as a styling-focused Japanese custom chopper around a Harley-Davidson Evolution-based V-twin, it's meant for boulevard cruising and show presence rather than performance or utility.
Rider Fit	The low 680mm seat height and single-seat design make it approachable for shorter riders, though the rigid rear suspension demands a tolerance for harsh jolts over rough pavement.
Character	It has classic springer-fork, hardtail chopper attitude with a torquey air-cooled V-twin rumble and a stripped-down, minimalist aesthetic.
Not Ideal For	This is not the bike for riders wanting long-distance touring comfort, a passenger seat, off-road capability, or sport-oriented cornering agility.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 680mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2020 Road Hopper Type 2I, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →