2017BMW R Nine T Pure

Rate this bike

43 fields on record

The 2017 BMW R nineT Pure is a stripped-down retro roadster ideal for riders seeking classic styling with modern reliability. Known for its minimalist design, air-cooled boxer engine, and agile handling, it delivers authentic vintage character without compromise. Its manageable 219 kg weight and 805 mm seat height make it accessible to a wide range of riders.

Capacity: 1170.0 ccm
Engine: Boxer, four-stroke
Gearbox: 6-speed
Wet weight: 219.0 kg
Seat height: 805 mm
Power: 110.0 HP (80.3 kW) @ 7750 RPM

⇄ Compare with another bike ＋ Add to garage All model years

Other years 2017 2018 2019 2020 2021 2022 2023 2024

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail45%

Cornering72%

City riding68%

Daily riding72%

Touring58%

Two-up55%

Track40%

Best for: Designed as a stylish, versatile all-rounder that blends heritage boxer character with light adventure-style ergonomics for mixed urban and backroad riding.
Built for: A soulful, air-cooled-flavored boxer twin with shaft drive, offering relaxed torque delivery and old-school mechanical charm rather than razor-sharp sportiness.
Not ideal for: Not ideal for riders seeking serious off-road capability, long-distance touring comfort, or top-tier outright speed and track performance.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 805mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2017 BMW R Nine T Pure, with a relaxed knee angle of around 125 degrees and a forward-leaning riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 751-820 mm — Middle Ground →

Find bikes that fit your height →

Range and running costs

Worked out in your browser - nothing is sent to us

Units

Currency

Fuel per litre

Riding a year

Based on the published US (EPA-style) fuel economy estimate and tank size. Real-world figures depend on how and where you ride, and the last litres of a tank are reserve. Prices shown greyed are examples - type your own.

Full specifications

Engine

Capacity: 1170.0 ccm
Power: 110.0 HP (80.3 kW) @ 7750 RPM
CO2 Emissions: 146 CO2 g/km
EPA Certificate No.: HBMXC01.2K21-002-R01
EPA Est. Fuel Consumption: 6.20 L/100km (37.9 US mpg)
EPA CO Emissions: 0.8 CO g/km
Torque: 116.0 Nm (11.8 kgf-m) @ 6000 RPM
Engine type: Boxer, four-stroke
Power/weight ratio: 0.5023 HP/kg (wet)
Bore x stroke: 101.0 x 73.0 mm
Compression: 12.0:1
Cooling system: Oil & air
Fuel system: Injection
Starting: Electric
Aspiration: Naturally aspirated
Valves per cylinder: 4

Transmission

Gearbox: 6-speed
Transmission type: Manual
Final drive: Shaft
Clutch: Single dry plate clutch, hydraulically operated

Dimensions & weight

Wheelbase: 1493 mm
Overall length: 2105 mm
Overall width: 900 mm
Overall height: 1240 mm
Seat height: 805 mm
Wet weight: 219.0 kg
Fuel capacity: 17.00 litres
Dry weight: Not on record - add it

Chassis & suspension

Frame: Three-section frame consisting of one front and two rear sections, load-bearing engine- gearbox unit, removeable pillion frame for single ride use
Front suspension: Telescopic forks with 43 mm fixed-tube diameter
Rear suspension: Cast aluminium single swinging arm with BMW Motorrad Paralever
Front wheel travel: 125 mm
Rear wheel travel: 120 mm
Rake (fork angle): 26.6°
Trail: 105 mm