What category is the 2010 Enfield Bullet 500?

General information
Category	Classic
Model	Enfield Bullet 500
Year	2010
Engine and Transmission Specifications
Clutch	Wet Plate
Transmission typefinal drive	Chain
Gearbox	5-speed
Cooling system	Air
Lubrication system	Dry Sump
Starter	Electric & kick
Ignition	Points
Valves per cylinder	2
Fuel system	Carburettor. Micarb VM 28mm
Bore x stroke	84.0 x 90.0 mm (3.3 x 3.5 inches)
Compression	6.5:1
Torque	35.00
Power	22.00
Stroke	4
Engine type	Single cylinder
Capacity:	499.00 ccm (30.45 cubic inches)
Physical measures and capacities
Wheelbase	1,370 mm (53.9 inches)
Ground clearance	140 mm (5.5 inches)
Seat height	760 mm (29.9 inches) If adjustable, lowest setting.
Dry weight	159.7 kg (352.0 pounds)

Enfield Bullet 500 dimensions and frame
Rear brakes diameter	152 mm (6.0 inches)
Rear brakes	Expanding brake (drum brake)
Front brakes diameter	178 mm (7.0 inches)
Front brakes	Expanding brake (drum brake)
Rear tyre dimensions	100/90-19
Front tyre dimensions	90/90-19
Speed and acceleration
Power/weight ratio	0.1378 HP/kg
Top speed	119.1 km/h (74.0 mph)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Fuel consumption pr. 10 km (6.2 miles)	3.36 litres (0.89 gallons)
Reserve fuel capacity	1.50 litres (0.40 gallons)
Fuel capacity	14.50 litres (3.83 gallons)

Performance Profile & Rider Fit

22 hp

Peak Power

12.5s

0-60 mph

Best For

Track10%

City60%

Cornering35%

Daily Riding55%

Touring45%

Passenger45%

Rider Profile

Best For	Well suited to new and returning riders thanks to its low power output and predictable, unintimidating delivery.
Purpose	Built for relaxed, classic-style cruising and short commutes rather than outright performance.
Rider Fit	The low seat height and moderate weight make it manageable for riders of varying heights and physical strength.
Character	A charming, old-school single-cylinder machine that prioritizes character and simplicity over speed or modern refinement.
Not Ideal For	Not for riders seeking quick acceleration, high-speed touring, or serious off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 760mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2010 Enfield Bullet 500, with a moderate knee angle of around 110 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →