Sportbikes

2016MV Agusta F3 800 RC

41 fields on record

The 2016 MV Agusta F3 800 RC is a lightweight middleweight supersport designed for experienced riders seeking sharp handling and aggressive styling. This exclusive 250-unit limited edition delivers high performance through its advanced Ride By Wire system and premium Sachs suspension, best known for precision cornering and track-ready agility on road and circuit.

Capacity: 798.0 ccm
Engine: In-line three-cylinder, four-stroke
Gearbox: 6-speed
Dry weight: 173.0 kg
Seat height: 805 mm
Power: 148.0 HP (108.0 kW) @ 13000 RPM

⇄ Compare with another bike ＋ Add to garage All model years

Other years 2016 2017 2018 2019 2020

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail5%

Cornering98%

City riding30%

Daily riding30%

Touring25%

Two-up15%

Track98%

Best for: Built primarily for track days and aggressive canyon carving, with its RC designation signaling closer ties to MV Agusta's racing program.
Built for: A visceral, high-strung Italian triple that rewards precise inputs with breathtaking acceleration and knife-edge cornering agility.
Not ideal for: Not suited for new riders, relaxed commuting, long-distance touring, or anyone seeking a plush, forgiving ride.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 805mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2016 MV Agusta F3 800 RC, with a cramped knee angle of around 70 degrees and a forward-leaning riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 751-820 mm — Middle Ground →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 798.0 ccm
Power: 148.0 HP (108.0 kW) @ 13000 RPM
Torque: 88.0 Nm (9.0 kgf-m) @ 10600 RPM
Engine type: In-line three-cylinder, four-stroke
Power/weight ratio: 0.8555 HP/kg (dry)
Bore x stroke: 79.0 x 54.3 mm
Compression: 13.0:1
Cooling system: Liquid
Fuel system: Injection
Starting: Electric
Ignition: CDI
Valves per cylinder: 4
Lubrication system: Wet sump

Transmission

Gearbox: 6-speed
Transmission type: Manual
Final drive: Chain
Clutch: Wet, multi-disc slipper clutch

Performance

Top speed: 269.0 km/h (167.1 mph)

Dimensions & weight

Wheelbase: 1380 mm
Overall length: 2060 mm
Overall width: 725 mm
Seat height: 805 mm
Dry weight: 173.0 kg
Fuel capacity: 16.50 litres
Ground clearance: 125 mm

Chassis & suspension

Frame: ALS Steel Tubular Trellis
Front suspension: Marzocchi UPD Telescopic fork
Rear suspension: Sachs adjustable monoshock
Front wheel travel: 125 mm
Rear wheel travel: 123 mm
Trail: 99 mm

Brakes & wheels

Front brakes: Double disc. Brembo radial-type monobloc, with 4 piston. Optional ABS..
Front brakes diameter: 320 mm
Rear brakes: Single disc. Brembo with 2 pistons. Optional ABS.
Rear brakes diameter: 220 mm
ABS: Optional
Front tyre: 120/70-ZR17
Rear tyre: 180/55-ZR17

Other

Color options: Red/white
Comments: Ride By Wire system. Limited edition of 250 numbered and certified bikes.

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.

What changed, year to year

Differences highlighted

Specification	2016	2017	2018	2019	2020
Capacity	798 cc	798 cc	798 cc	798 cc	798 cc
Dry weight	173 kg	173 kg	173 kg	165 kg	165 kg
Seat height	805 mm	805 mm	805 mm	805 mm	805 mm
Fuel capacity	16.5 L	16.5 L	16.5 L	16.5 L	16.5 L