Aprilia Tuono V4 1100 RR - 2019 Specifications and Reviews
General information | |
| Category | Naked bike | 
| Year | 2019 | 
| Model | Aprilia Tuono V4 1100 RR | 
Engine and Transmission Specifications | |
| Exhaust system | 4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with ECU-controlled bypass valve and integrated trivalent catalytic converter (Euro 3) | 
| Greenhouse gases | 154.7 CO2 g/km. (CO2 - Carbon dioxide emission) | 
| Fuel consumption | 6.67 litres/100 km (15.0 km/l or 35.27 mpg) | 
| Driveline | Straight cut gears and integrated flexible coupling, drive ratio: 73/44 primary drive. Chain 42/16 final drive. | 
| Clutch | Multiplate wet clutch with mechanical slipper system. | 
| Transmission type | Chain (final drive) | 
| Gearbox | 6-speed | 
| Cooling system | Liquid | 
| Lubrication system | Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling) | 
| Ignition | Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and “stick-coil†type coils | 
| Fuel control | Double Overhead Cams/Twin Cam (DOHC) | 
| Fuel system | Injection. Airbox with front dynamic air intakes. 4 Weber-Marelli 48-mm throttle bodies with 4 injectors and latest generation Ride-by-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion: T (Track), S (Sport), R | 
| Valves per Cylinder | 4 | 
| Bore x Stroke | 82.0 x 52.3 mm (3.2 x 2.1 inches) | 
| Compression | 13.6:1 | 
| Max RPM RPM | 12300 | 
| Torque | 115.0 Nm (11.7 kgf-m or 84.8 ft.lbs) @ 10500 Revolutions">RPM | 
| Power | 201.0 Horsepower">HP (146.7 Kilowatt">kW)) @ 13000 Revolutions">RPM | 
| Engine details | Longitudinal 65° V-4 | 
| Engine type | V4, four-stroke | 
| Capacity: | 1077.0 ccm (65.72 cubic inches) | 
|   | |
Brakes, suspension, Frame and wheels | |
| Wheels | Cast aluminium wheels with 3 split spoke design. | 
| Rear brakes | Single disc. ABS. Brembo floating calliper. | 
| Diameter | 330 mm (13.0 inches) | 
| Front brakes | Double disc. ABS. Floating stainless steel discs with lightweight stainless steel rotor with 6 studs. Brembo radial callipers with 4 diam. horizontally opposed 32 mm pistons. Sintered pads. Axial pump master cylinder and metal braided brake hoses. | 
| Rear tire | 200/55-ZR17 | 
| Front tire | 120/70-ZR17 | 
| Rear wheel travel | 130 mm (5.1 inches) | 
| Rear Suspension | Double braced aluminium swingarm; mixed low thickness and sheet casting technology. Sachs monoshock with piggy-back, fully adjustable in: spring preload, hydraulics in compression and rebound. APS progressive linkages. | 
| Front wheel travel | 120 mm (4.7 inches) | 
| Front Suspension | Upside-down “one by one†Sachs fork, Ø 43 mm stanchions. Forged aluminium radial calliper mounting bracket. Completely adjustable spring preload and hydraulic compression and rebound damping. | 
| Trail | 100 mm (3.9 inches) | 
| Rake (fork angle) | 24.7° | 
| Frame type | Aluminium dual beam chassis with cast and pressed sheet elements. (Sachs steering damper on APRC version) | 
Physical measures and capacities | |
| Reserve fuel capacity | 4.00 litres (1.06 US gallons) | 
| Fuel capacity | 18.50 litres (4.89 US gallons) | 
| Wheelbase | 1442 mm (56.8 inches) | 
| Ground clearance | 125 mm (4.9 inches) | 
| Overall width | 735 mm (28.9 inches) | 
| Overall length | 2055 mm (80.9 inches) | 
| Overall height | 1090 mm (42.9 inches) | 
| Seat height | 825 mm (32.5 inches) If adjustable, lowest setting. | 
| Power/weight ratio | 1.0924 HP/kg | 
| Weight incl. oil, gas, etc | 204.0 kg (449.7 pounds) | 
| Dry weight | 184.0 kg (405.7 pounds) | 
Other specs | |
| Electrical | Flywheel mounted 420W alternator with rare earth magnets. | 
| Instruments | Analogue/digital | 
| Starter | Electric | 
| Color options | Black/red/Grey | 
Rider Reviews
									Total comments: 1
 
					







				
				
				
				
				
				
				
Please Login or Register if you would like to leave a comment.