NCR Leggera - 2012 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

Category:Super motard
Year:2012
Model:NCR Leggera
   

Engine and Transmission Specifications

Exhaust system:Full exhaust 2 into 1 into 2 configuration with catalitic converter and lambda system. Exhaust is in titanium and the mufflers are in carbon. Design by NCR and built by Zard, the silencers are 45% lighter than stock.
Transmission type,final drive:Chain
Gearbox:6-speed
Cooling system:Oil & air
Lubrication system:2 into 1 into 2 configuration with catalitic converter and lambda system. Exhaust is in titanium and the mufflers are in carbon. Design by NCR and built by Zard, the silencers are 45% lighter than stock.
Fuel control:Desmodromic valve control
Fuel system:Injection. EFI Magneti Marelli, 45mm throttle bodies.
Valves per cylinder:2
Power:90.00
Engine details:Ducati DS 1100 engine. Optional 125 HP bore.
Engine type:V2, four-stroke
Capacity:1078.00 ccm (65.78 cubic inches)

Brakes, suspension, Frame and wheels

Wheels:Carbon fiber wheels from BST
Rear brakes diameter:200 mm (7.9 inches)
Rear brakes:Single disc. WAVE rotor, Brembo 2 piston caliper
Front brakes diameter:300 mm (11.8 inches)
Front brakes:Double disc. WAVE rotors, radial monoblock Brembo Racing calipers with 4 pistons and 2 pads.
Rear tyre dimensions:180/55-R17
Front tyre dimensions:120/70-R17
Rear suspension:NCR- Ohlins monoshock, fully adjustable including low and high speed circuits and configured by NCR CORSE
Front suspension:Ohlins titanium nitride coated 46mm full adjustable with NCR Corse valving, adjustable offset NCR triple clamps made in avionic aluminum. NCR Corse billet fork bottoms
Frame type:Trellis frame made entirely of Grade 9 Titanium. Weight: 4,8 Kg (10.6 lbs)
   

Physical measures and capacities

Wheelbase:1,400 mm (55.1 inches)
Power/weight ratio:0.5732 HP/kg
Dry weight:157.0 kg (346.1 pounds)

Other specs

Comments:Italian brand.
Factory warranty:3 years
Reserve fuel capacity:4.50 litres (1.19 gallons)
Fuel capacity:21.00 litres (5.55 gallons)
Wheelbase:1,470 mm (57.9 inches)
Ground clearance:162 mm (6.4 inches)
Overall width:865 mm (34.1 inches)
Overall length:2,170 mm (85.4 inches)
Seat height:800 mm (31.5 inches) If adjustable, lowest setting.
Rear tyre:180/55-R17
Front tyre:120/70-R17
Rear wheel travel:150 mm (5.9 inches)
Rear Suspension:Oval steel tube swin arm. Single lateral shock absorber with fully adjustable pibby tank
Front wheel travel:150 mm (5.9 inches)
Front Suspension:Marzocchi upside-down fork
Trail:100 mm (3.9 inches)
Rake (fork angle):24.5°
Emission details:Euro 3.
Clutch:Wet, multi-plate
Ignition:I.A.W. electronic
Valves per cylinder:4
Bore x Stroke:107.0 x 66.0 mm (4.2 x 2.6 inches)
Torque:102.00 Nm (10.4 kgf-m or 75.2 ft.lbs) @ 6700 Revolutions">RPM
Capacity:1187.00 ccm (72.43 cubic inches)
Model:Moto Morini 9 1-2
Color options:Grey/silver. Other colors optional.
Seat:Biposto leather seat by Schedoni per NCR.
Instruments:OEM Ducati Hypermotard
Starter:Electric

Related Motorcycle Specifications