Scorpa T-Ride 250F - 2012 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

Category:Enduro / offroad
Year:2012
Model:Scorpa T-Ride 250F

Engine and Transmission Specifications

Clutch:Wet multidisc
Transmission type,final drive:Chain
Gearbox:5-speed
Cooling system:Liquid
Ignition:CDI
Fuel control:DOHC
Fuel system:Carburettor. VHST 28 mm DELL ORTO
Valves per cylinder:5
Bore x stroke:77.0 x 53.6 mm (3.0 x 2.1 inches)
Engine details:Yamaha engine. Titanium valves.
Engine type:Single cylinder, four-stroke
Capacity:249.00 ccm (15.19 cubic inches)
   

Brakes, suspension, Frame and wheels

Wheels:Black rims
Rear brakes diameter:220 mm (8.7 inches)
Rear brakes:Single disc
Front brakes diameter:260 mm (10.2 inches)
Front brakes:Single disc
Rear tyre dimensions:4.00-18
Front tyre dimensions:2.75-21
Rear suspension travel:200 mm (7.9 inches)
Rear suspension:Swing arm, and SACHS adjustable hydraulic single damper, without link, 200 mm wheel travel
Front suspension travel:200 mm (7.9 inches)
Front suspension:Hydraulic MARZOCCHI fork, compression and rebond damping independently adjustable, 200 mm axle travel
Frame type:Perimetric frame

Physical measures and capacities

Fuel capacity:7.00 litres (1.85 gallons)
Wheelbase:1,404 mm (55.3 inches)
Ground clearance:325 mm (12.8 inches)
Overall length:2,093 mm (82.4 inches)
Overall height:840 mm (33.1 inches)
Seat height:850 mm (33.5 inches) If adjustable, lowest setting.
Dry weight:96.0 kg (211.6 pounds)

Other specs

Comments:Italian brand.
Factory warranty:3 years
Instruments:Electronic/analogical rev counter and speedometer with multifunctional LCD display
Reserve fuel capacity:4.50 litres (1.19 gallons)
Wheelbase:1,470 mm (57.9 inches)
Overall width:865 mm (34.1 inches)
Power/weight ratio:0.5909 HP/kg
Rear tyre:180/55-R17
Front tyre:120/70-R17
Rear wheel travel:150 mm (5.9 inches)
Rear Suspension:Oval steel tube swin arm. Single lateral shock absorber with fully adjustable pibby tank
Front wheel travel:150 mm (5.9 inches)
Front Suspension:Marzocchi upside-down fork
Trail:100 mm (3.9 inches)
Rake (fork angle):24.5°
Exhaust system:3-way catalytic converter with oxygen sensor.
Emission details:Euro 3.
Lubrication system:Forced with trochoidal pump
Valves per cylinder:4
Bore x Stroke:107.0 x 66.0 mm (4.2 x 2.6 inches)
Torque:102.00 Nm (10.4 kgf-m or 75.2 ft.lbs) @ 6700 Revolutions">RPM
Power:117.00 Horsepower">HP (85.4 Kilowatt">kW)) @ 8500 Revolutions">RPM
Capacity:1187.00 ccm (72.43 cubic inches)
Model:Moto Morini 9 1-2
Color options:Black/orange
Starter:Electric & kick

Related Motorcycle Specifications