Suzuki Boulevard S40 - 2012 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

Category:Custom / cruiser
Year:2012
Model:Suzuki Boulevard S40
   

Engine and Transmission Specifications

Greenhouse gases:86.5 CO
Fuel consumption:3.73 litres/100 km (26.8 km/l or 63.06 mpg)
Transmission type,final drive:Belt
Gearbox:5-speed
Cooling system:Air
Ignition:Electronic ignition (transistorized)
Fuel control:OHC
Fuel system:Carburettor. MIKUNI BS40, single
Bore x stroke:83.0 x 74.4 mm (3.3 x 2.9 inches)
Compression:10.0:1
Engine type:Single cylinder, four-stroke
Capacity:652.00 ccm (39.79 cubic inches)
   

Brakes, suspension, Frame and wheels

Wheels:Polished spoke wheels
Rear brakes:Expanding brake (drum brake)
Front brakes:Single disc
Rear tyre dimensions:140/80-15
Front tyre dimensions:100/90-19
Rear suspension:Swing arm type, coil spring, oil damped
Front suspension:Telescopic, coil spring, oil damped

Physical measures and capacities

Fuel capacity:10.50 litres (2.77 gallons)
Wheelbase:1,480 mm (58.3 inches)
Ground clearance:135 mm (5.3 inches)
Overall width:720 mm (28.3 inches)
Overall length:2,180 mm (85.8 inches)
Seat height:700 mm (27.6 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc:173.0 kg (381.4 pounds)

Other specs

Comments:Italian brand.
Instruments:Electronic/analogical rev counter and speedometer with multifunctional LCD display
Reserve fuel capacity:4.50 litres (1.19 gallons)
Wheelbase:1,470 mm (57.9 inches)
Power/weight ratio:0.5909 HP/kg
Dry weight:198.0 kg (436.5 pounds)
Rear brakes diameter:220 mm (8.7 inches)
Front brakes diameter:320 mm (12.6 inches)
Rear tyre:180/55-R17
Front tyre:120/70-R17
Rear wheel travel:150 mm (5.9 inches)
Rear Suspension:Oval steel tube swin arm. Single lateral shock absorber with fully adjustable pibby tank
Front wheel travel:150 mm (5.9 inches)
Front Suspension:Marzocchi upside-down fork
Trail:100 mm (3.9 inches)
Rake (fork angle):24.5°
Frame type:Verlicchi high strength steel tube tellis frame
Exhaust system:3-way catalytic converter with oxygen sensor.
Emission details:Euro 3.
Clutch:Wet, multi-plate
Lubrication system:Forced with trochoidal pump
Valves per cylinder:4
Bore x Stroke:107.0 x 66.0 mm (4.2 x 2.6 inches)
Torque:102.00 Nm (10.4 kgf-m or 75.2 ft.lbs) @ 6700 Revolutions">RPM
Power:117.00 Horsepower">HP (85.4 Kilowatt">kW)) @ 8500 Revolutions">RPM
Engine details:87 degree V-twin
Capacity:1187.00 ccm (72.43 cubic inches)
Model:Moto Morini 9 1-2
Color options:Black/orange, white/silver
Factory warranty:12 month unlimited mileage limited warranty.
Seat:Sleek, one-piece saddle
Electrical:12 V maintenance-free battery.
Starter:Electric

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.