BMW R 1200 C Montauk - 2004 Specifications and Reviews
2004
General information | |
| Category | Custom / cruiser | 
| Year | 2004 | 
| Model | BMW R 1200 C Montauk | 
Engine and Transmission Specifications | |
| Transmission type,final drive | Shaft drive (cardan) | 
| Gearbox | 5-speed | 
| Cooling system | Oil & air | 
| Fuel control | SOHC | 
| Fuel system | Injection | 
| Valves per cylinder | 4 | 
| Bore x stroke | 101.0 x 73.0 mm (4.0 x 2.9 inches) | 
| Compression | 10.0:1 | 
| Top speed | 168.0 km/h (104.4 mph) | 
| Torque | 98.00 Nm (10.0 kgf-m or 72.3 ft.lbs) @ 3000 | 
| Power | 61.00 | 
| Engine type | Two cylinder boxer, four-stroke | 
| Capacity: | 1170.00 ccm (71.39 cubic inches) | 
Brakes, suspension, Frame and wheels | |
| Rear brakes diameter | 285 mm (11.2 inches) | 
| Rear brakes | Single disc | 
| Front brakes diameter | 305 mm (12.0 inches) | 
| Front brakes | Double disc | 
| Rear tyre dimensions | 170/80-VR15 | 
| Front tyre dimensions | 150/80-VR16 | 
| Rear suspension travel | 100 mm (3.9 inches) | 
| Rear suspension | Die-cast steel single-sided swinging arm with BMW Motorrad Monolever; WAD strut (travel-related damping), spring pre-load adjustable to continuously variable levels by means of hydraulic handwheel | 
| Front suspension travel | 144 mm (5.7 inches) | 
| Front suspension | BMW Motorrad Telelever; stanchion diameter 35 mm, central strut | 
| Frame type | Three-section composite frame consisting of front and rear section, load bearing engine. | 
|   | |
Physical measures and capacities | |
| Reserve fuel capacity | 4.00 litres (1.06 gallons) | 
| Fuel capacity | 17.50 litres (4.62 gallons) | 
| Wheelbase | 1,641 mm (64.6 inches) | 
| Overall width | 1,120 mm (44.1 inches) | 
| Overall length | 2,370 mm (93.3 inches) | 
| Overall height | 1,340 mm (52.8 inches) | 
| Seat height | 790 mm (31.1 inches) If adjustable, lowest setting. | 
| Power/weight ratio | 0.2490 HP/kg | 
| Dry weight | 245.0 kg (540.1 pounds) | 



				
				
				
				
				
				
				
Please Login or Register if you would like to leave a comment.