Ducati 1199 Panigale S - 2013 Specifications and Reviews
The 2013 Ducati 1199 Panigale S is a cutting-edge superbike designed for experienced track-focused riders seeking raw performance and Italian engineering excellence. Powered by a 1198cc L-Twin engine producing 191.77 horsepower, it delivers aggressive acceleration and precise handling through its advanced chassis technology. Known for its revolutionary monocoque frame and aggressive styling, the Panigale S dominates both road and race circuits with uncompromising sportiness.
General information | |
| Category | Sport |
| Year | 2013 |
| Model | Ducati 1199 Panigale S |
Engine and Transmission Specifications | |
| Exhaust system | 2-1-2 system with catalytic converter and 2 lambda probes. Twin stainless steel mufflers with alumimum outer sleeves |
| Emission details | Euro 3 |
| Clutch | Slipper and self-servo wet multiplate clutch with hydraulic control |
| Transmission type,final drive | Chain |
| Gearbox | 6-speed |
| Cooling system | Liquid |
| Fuel control | Desmodromic valve control |
| Fuel system | Injection |
| Valves per cylinder | 4 |
| Bore x stroke | 112.0 x 60.8 mm (4.4 x 2.4 inches) |
| Compression | 12.5:1 |
| Torque | 132.00 Nm (13.5 kgf-m or 97.4 ft.lbs) @ 9000 |
| Power | 191.77 |
| Engine details | L-Twin cylinder |
| Engine type | V2, four-stroke |
| Capacity: | 1198.00 ccm (73.10 cubic inches) |
| | |
Brakes, suspension, Frame and wheels | |
| Rear brakes diameter | 245 mm (9.6 inches) |
| Rear brakes | Single disc. Two-piston calipers. |
| Front brakes diameter | 330 mm (13.0 inches) |
| Front brakes | Double disc. ABS. Floating discs. Four-piston calipers. Radially mounted. |
| Rear tyre dimensions | 200/55-ZR17 |
| Front tyre dimensions | 120/70-ZR17 |
| Rear suspension | Fully adjustable Ohlins TTX36 unit. Electronic compression and rebound damping adjustment. Adjustable linkage |
| Front suspension | Öhlins NIX30 43mm with TiN, fully adjustable usd fork. Electronic compression and rebound damping adjustment. |
| Trail | 100 mm (3.9 inches) |
| Rake (fork angle) | 24.0° |
| Frame type | Monocoque Aluminium |
Physical measures and capacities | |
| Fuel capacity | 17.00 litres (4.49 gallons) |
| Wheelbase | 1,437 mm (56.6 inches) |
| Seat height | 825 mm (32.5 inches) If adjustable, lowest setting. |
| Power/weight ratio | 1.1693 HP/kg |
| Weight incl. oil, gas, etc | 188.0 kg (414.5 pounds) |
| Dry weight | 164.0 kg (361.6 pounds) |
| | |
Other specs | |
| Comments | Limited edition of 10 bikes. |
| Oil capacity | 4.90 litres (0.32 quarts) |
| Wheelbase | 1,626 mm (64.0 inches) |
| Wheels | Carbon fibre, 5-spoke |
| Rear tyre | 240/40-VR18 |
| Front tyre | 130/60-VR18 |
| Rear Suspension | Dual Penske; coil over with cooling reservoir; multi adjustable. |
| Front Suspension | Marzocchi 50mm. inverted front forks with radial mounts. |
| Bore x Stroke | 111.1 x 111.1 mm (4.4 x 4.4 inches) |
| Torque | 203.40 Nm (20.7 kgf-m or 150.0 ft.lbs) |
| Color options | Red, white |
| Factory warranty | 24 months unlimited mileage |
| Instruments | Digital unit with TFT colour display. |
| Starter | Electric |
Rider Reviews
Add a Comment
Related Motorcycle Specifications
More Ducati Motorcycles
Related Variants
⚠ Safety Recalls (6)
Ducati North America (Ducati) is recalling certain model year 2012-2013 1199 Panigale and Panigale S motorcycles. The left handlebar switch may not get power from its connection at the dashboard, preventing the horn, instrument panel display, high beam and right turn signals from functioning. As such, these motorcycles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) number 123, "Motorcycle Controls and Displays."
Risk: The rider's inability to use the horn, right turn indicators and high beam could increase the risk of a crash.
Remedy: Ducati will notify owners, and dealers will install an additional wiring harness, free of charge. The recall began on June 6, 2014. Owners may contact Ducati at 1-800-231-6696. Ducati's number for this recall is RCL-14-001.
Ducati is recalling certain model year 2012-2013 1199 Panigale motorcycles manufactured from March 16, 2012, through July 12, 2012. The front brake master cylinder reservoir hose might interfere with the threading end of the reservoir retaining screw.
Risk: The front brake master cylinder reservoir hose might interfere with the threading end of the reservoir of the retaining screw causing damage to the hose, which could lead to a front brake system failure, increasing the risk of a crash.
Remedy: Ducati will notify owners, and authorized dealers will install a cap nut and a washer at the end of the reservoir retaining screw, free of charge. The safety recall began on October 15, 2012. Owners may contact Ducati at 1-800-231-6696 or through their website at www.ducati.com.
Ducati is recalling certain model year 2012-2013 1199 Panigale motorcycles manufactured from March 16, 2012, through July 12, 2012. The exhaust butterfly valve bowden cable cover could melt or burn due to excess heat of the catalytic converter.
Risk: Melting and burning of the bowden cable cover could lead to smoke and/or fire.
Remedy: Ducati will notify owners, and authorized dealers will the replace old exhaust butterfly valve bowden cable cover with a new one, free of charge. The safety recall began on October 15, 2012. Owners may contact Ducati at 1-800-231-6696 or through their website at www.ducati.com.
Ducati is recalling certain model year 2012-2013 1199 Panigale motorcycles manufactured from March 16, 2012, through July 12, 2012. The right and left swingarm shaft pivots can loosen.
Risk: The swingarm shaft pivots can loosen from the swingarm which can lead to loss of control of the motorcycle, increasing the risk of personal injury.
Remedy: Ducati will notify owners, and authorized dealers will tighten the right and left swingarm shaft pivots to the proper torque settings, free of charge. The safety recall began on October 15, 2012. Owners may contact Ducati at 1-800-231-6696 or through their website at www.ducati.com.
Ducati is recalling certain model year 2012-2013 1199 Panigale motorcycles manufactured from March 16, 2012, through July 12, 2012. Screws that secure the steering damper to the steering head could fall out due to an insufficient amount of Loctite applied to the threads.
Risk: The steering damper can detach from the steering head which can lead to loss of control of the motorcycle, increasing the risk of a crash.
Remedy: Ducati will notify owners, and authorized dealers will remove both screws, clean the threads, apply the proper amount of Loctite, and tighten to the proper torque settings, free of charge. The safety recall began on October 15, 2012. Owners may contact Ducati at 1-800-231-6696 or through their website at www.ducati.com.
Ducati is recalling certain model year 2012-2013 1199 Panigale motorcycles manufactured from March 16, 2012, through July 12, 2012 . Due to an incorrect assembly tolerance, the Uniball bearing on the damper rod eyelet could slip out of its seat on the Ohlins steering damper.
Risk: The steering damper can detach from its mounting point which can lead to loss of control of the motorcycle, increasing the risk of a crash.
Remedy: Ducati will notify owners, and authorized dealers will install a special washer at the steering damper's mounting point, free of charge. The safety recall began on October 15, 2012. Owners may contact Ducati at 1-800-231-6696 or through their website at www.ducati.com.
Source: NHTSA. View all Ducati recalls →











































Please Login or Register if you would like to leave a comment.