What category is the 1996 Harley-Davidson 883 Sportster Hugger?

General information
Category	Custom / cruiser
Model	Harley-Davidson 883 Sportster Hugger
Year	1996
Engine and Transmission Specifications
Transmission typefinal drive	Belt
Gearbox	5-speed
Cooling system	Air
Starter	Electric
Valves per cylinder	2
Torque	58.80
Power	42.00
Stroke	4
Engine type	V2
Capacity:	883.00 ccm (53.88 cubic inches)
Physical measures and capacities
Seat height	680 mm (26.8 inches) If adjustable, lowest setting.
Dry weight	220.0 kg (485.0 pounds)

Harley-Davidson 883 Sportster Hugger dimensions and frame
Rear brakes	Single disc
Front brakes	Single disc
Speed and acceleration
Power/weight ratio	0.1909 HP/kg
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

50 hp

Peak Power

7.5s

0-60 mph

Best For

Track10%

City55%

Cornering35%

Daily Riding55%

Touring45%

Passenger40%

Rider Profile

Best For	This is an approachable, forgiving machine well suited to beginner or returning riders thanks to its low seat height and modest power delivery.
Purpose	It's built for relaxed, low-speed cruising and boulevard riding rather than outright performance or long-distance touring.
Rider Fit	The very low seat height and manageable weight make it easy for shorter riders to flat-foot confidently at stops.
Character	It has classic air-cooled V-twin cruiser charm, with a torquey, laid-back power delivery and unmistakable Harley thump.
Not Ideal For	It's not the right bike for riders seeking high-speed thrills, aggressive cornering, or serious off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 680mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 1996 Harley-Davidson 883 Sportster Hugger, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: estimated (wheelbase estimated from this category's typical bike, not this model's own spec). Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →