Harley-Davidson FLHT Electra Glide Standard - 2010 Specifications and Reviews

The 2010 Harley-Davidson FLHT Electra Glide Standard is a heavyweight touring cruiser designed for long-distance comfort and classic American style. Its air-cooled 1584cc V-twin engine delivers smooth, reliable power with 127 Nm of torque, while the six-speed transmission and belt drive ensure effortless highway cruising. Best known for its iconic styling, generous touring capabilities, and legendary dependability, it appeals to experienced riders seeking traditional motorcycle touring.

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryTouring
Year2010
ModelHarley-Davidson FLHT Electra Glide Standard
 
 

Engine and Transmission Specifications

Exhaust system2-1-2 chrome exhaust with dual mufflers and taper end caps
Clutch9-plate, wet
Transmission type,final driveBelt
Gearbox6-speed
Cooling systemAir
Fuel systemInjection. Electronic Sequential Port Fuel Injection (ESPFI)
Bore x stroke95.3 x 111.1 mm (3.8 x 4.4 inches)
Compression9.2:1
Torque127.00 Nm (12.9 kgf-m or 93.7 ft.lbs) @ 3500
Engine typeV2, four-stroke
Capacity:1584.00 ccm (96.66 cubic inches)
 
 

Brakes, suspension, Frame and wheels

Rear brakes diameter300 mm (11.8 inches)
Rear brakesSingle disc. 4-piston fixed caliper
Front brakes diameter300 mm (11.8 inches)
Front brakesDouble disc. 4-piston fixed caliper
Rear tyre dimensions180/65-B16
Front tyre dimensions130/80-B17
Rear suspension travel76 mm (3.0 inches)
Rear suspensionAir-adjustable
Front suspension travel117 mm (4.6 inches)
Front suspension41.3mm telescopic, triple circuit damping
Trail170 mm (6.7 inches)
Rake (fork angle)26.0°
Frame typeMild steel; tubular frame; two-piece stamped and welded backbone;

Physical measures and capacities

Oil capacity3.50 litres (0.23 quarts)
Fuel capacity22.70 litres (6.00 gallons)
Wheelbase1,625 mm (64.0 inches)
Ground clearance145 mm (5.7 inches)
Overall length2,460 mm (96.9 inches)
Seat height740 mm (29.1 inches) If adjustable, lowest setting.
Dry weight355.0 kg (782.6 pounds)

Other specs

Color optionsVivid Black, Flame Blue Pearl

Rider Fit Visualizer

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 740mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2010 Harley-Davidson FLHT Electra Glide Standard, with a cramped knee angle of around 80 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.

⚠ Safety Recalls (2)

EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH Oct 2011 · 11V506000

HARLEY-DAVIDSON IS RECALLING CERTAIN MODEL YEAR 2009-2012 TOURING, CVO TOURING AND TRIKE VEHICLES MANUFACTURED FROM JUNE 6, 2008, THROUGH SEPTEMBER 16, 2011. SEE THE ABOVE LIST FOR THE MODELS INCLUDED IN THE RECALL. THE REAR BRAKE LIGHT SWITCH MAY BE EXPOSED TO EXCESSIVE HEAT FROM THE EXHAUST SYSTEM.

Risk: THE EXCESSIVE HEAT MAY CAUSE THE SWITCH TO NOT ACTIVATE THE BRAKE LAMP OR ACTIVATE THE BRAKE LAMP WHEN NO BRAKE IS APPLIED AND/OR CAUSE A BRAKE FLUID LEAK AT THE BRAKE LIGHT SWITCH, AFFECTING REAR BRAKE PERFORMANCE. EITHER CONDITION MAY INCREASE THE RISK OF A CRASH.

Remedy: HARLEY-DAVIDSON WILL NOTIFY OWNERS, AND DEALERS WILL A INSTALL A REAR BRAKE LIGHT SWITCH KIT, FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING OCTOBER 31, 2011. OWNERS MAY CONTACT HARLEY-DAVIDSON AT 1-414-343-4056.

FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:MOUNTING Dec 2009 · 09V457000

HARLEY-DAVIDSON IS RECALLING CERTAIN MODEL YEAR 2009 AND 2010 TOURING FAMILY MOTORCYCLES, INCLUDING CVO TOURING AND TRIKE PRODUCTS, MANUFACTURED FROM JUNE 6, 2008 THROUGH NOVEMBER 19, 2009. THE FRONT FUEL TANK MOUNTS MAY DISTORT IN REACTION TO SEVERE FRAME DAMAGE FROM A FRONTAL COLLISION. THIS CONDITION MAY CAUSE A FUEL LEAK AT THE WELD OF THE FRONT BRACKET TO THE TUNNEL.

Risk: A FUEL LEAK IN THE PRESENCE OF AN IGNITION SOURCE MAY RESULT IN A FIRE, WHICH COULD LEAD TO INJURY OR DEATH TO THE RIDER.

Remedy: DEALERS WILL INSTALL A LEFT AND RIGHT BRACE, WHICH ARE INTENDED TO REDUCE FRONT MOUNT DISTORTION DURING CERTAIN CRASH CONDITIONS. THIS REPAIR WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 11, 2009. OWNERS MAY CONTACT HARLEY-DAVIDSON AT 1-414-343-4056.

Source: NHTSA. View all Harley-Davidson recalls →